Rohde & Schwarz SMU200A - File Manager

Manual Operation
R&S
®
SMU200A
116Operating Manual 1007.9845.32 ─ 15
Working with the File Select dialog
1. Access the "File Select" dialog (see "Accessing files with user data" on page 114).
2. Navigate in the "File Select" dialog.
3. Load an existing file.
In the "Recall Settings" dialog, mark a file and press the "Select" button.
4. Save a file.
In the "Save Settings" dialog, enter file name in the "File Name:" field.
Select the directory to which the file is to be saved and then select the "Save" button.
5. Create a new file.
To create a new file, use the "Save Settings" functionality, i.e. specify file name and
directory and save the file.
The created file is empty; it must be filled with the necessary values in the individual
editor.
4.7.2 File Manager
The "File Manager" allows general file management such as copying, shifting, renaming
and deleting files as well as generating new directories. Thus, also externally created
files, for example waveforms created by using the R&S
®
WinIQSIM2 program, can be
saved to the R&S SMU by copying them from a memory stick or a network to the internal
hard disk.
Use the "File Type" to select a file type form the list. This can be used to process either
all files (all files (*) selection) or a specific selection of files (e.g. waveforms (*.wv)
selection). See chapter 4.7.2.1, "Extensions for User FilesExtensions for User Files",
on page 117 for an overview of the supported file extensions. The available drives and
directories and the files of the selected directory are displayed. The currently selected
path is displayed above the windows. If the area is opened several times, the path last
File Management