Rohde & Schwarz SMU200A - Graphical Display of Output Signal Characteristics

Manual Operation
R&S
®
SMU200A
96Operating Manual 1007.9845.32 ─ 15
Each of the setting fields is assigned a parameter name. The kind of setting varies
depending on the parameter to be set. Some settings can only be made in a specific
configuration. If setting is not permitted with the specific configuration selected, the
respective item is disabled and displayed in gray and the entry or selection field cannot
be accessed.
4.2.7 Graphical Display of Output Signal Characteristics
The graphical display of the output signal enables the user to rapidly check signal char-
acteristics without connecting an analyzer. Zoom functions and the display of a reference
trace allow in-depth evaluation. The diagram is displayed on top of the block diagram. It
can be minimized and called in the same way as a menu.
Example: I/Q diagram
To access the "Graphics Settings" dialog for selecting the graphics display of the output
signal, select the "Graphics" function block in the diagram or press the MENU (CTRL+M)
key.
Operation of the graphics windows is analogous to menu operation.
The menu and the individual graphical displays are described in chapter 5.3, "Graphical
Display - Graphics", on page 162.
4.3 Accessing Dialogs
The MENU (CTRL+M) key opens the complete menu tree. Selecting a functional block
and pressing the ENTER key opens the menu associated with this block.
Accessing Dialogs