Rohde & Schwarz SMU200A - Hcopy:file[:Name]:Auto:directory; Hcopy:file[:Name]:Auto:directory:clear; Hcopy:file[:Name]:Auto:file

Remote Control Commands
R&S
®
SMU200A
535Operating Manual 1007.9845.32 ─ 15
:HCOPy:FILE[:NAME]:AUTO:DIRectory <Directory>
This command defines the directory into which the hardcopy files will be stored if auto
naming is activated (HCOP:FILE:AUTO:STAT ON).The directory will be created if it does
not exist yet.
Parameters:
string
.\HCopy
<Directory>
*RST:
HCOP:FILE:AUTO:DIR 'E:/HCopy'
defines the destination directory 'E:/HCopy'
Example:
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar
This command deletes all files with extensions "bmp", "img", "png" and "xpm" in the
directory set for automatic naming.
HCOP:FILE:AUTO:DIR:CLE
deletes all image files with extensions "bmp", "img", "png" and
"xpm".
Example:
EventUsage:
:HCOPy:FILE[:NAME]:AUTO:FILE?
This command queries the file name that what generated using the automatic naming
settings. By default the automatically generated file name is composed of:
<Prefix><YYYY><MM><DD><Number>.<Format>.
Each component can be deactivated/activated separately to individually design the file
name.
Return values:
string<File>
HCOPy Subsystem