EasyManua.ls Logo

Rohde & Schwarz SMU200A - Source:bb:graphics Subsystem; [:Source<Hw>]:Bb:DM:standard:ulist:delete; [:Source<Hw>]:Bb:DM:standard:ulist:load; [:Source<Hw>]:Bb:DM:standard:ulist:store

Rohde & Schwarz SMU200A
888 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote Control Commands
R&S
®
SMU200A
656Operating Manual 1007.9845.32 ─ 15
[:SOURce<hw>]:BB:DM:STANdard:ULISt:DELete <Delete>
This command deletes the selected file with Digital Standard settings. The directory is
set using command MMEM:CDIRectory. A path can also be specified, in which case the
files in the specified directory are read. The file extension may be omitted. Only files with
the file extension *.dm_stu will be deleted.
Setting parameters:
<file name><Delete>
BB:DM:STAN:ULIS:DEL 'DM_QAM'
deletes file 'DM_QAM'.
Example:
Setting onlyUsage:
[:SOURce<hw>]:BB:DM:STANdard:ULISt:LOAD <Load>
This command loads the selected file with Digital Standard settings. The directory is set
using command MMEM:CDIRectory. A path can also be specified, in which case the
files in the specified directory are read. The file extension may be omitted. Only files with
the file extension *.dm_stu will be loaded.
Setting parameters:
<file name><Load>
BB:DM:STAN:ULIS:LOAD 'DM_QAM'
loads file 'DM_QAM'.
Example:
Setting onlyUsage:
[:SOURce<hw>]:BB:DM:STANdard:ULISt:STORe <Store>
This command stores the current Digital Standard settings into the selected file. The
directory is set using command MMEM:CDIRectory. A path can also be specified, in
which case the files in the specified directory are read. Only the file name has to be
entered. User Standards are stored as files with the specific file extensions *.dm_stu.
Setting parameters:
<file name><Store>
BB:DM:STAN:ULIS:STOR 'DM_QAM'
stores the current Digital Standard settings into file 'DM_QAM'.
Example:
Setting onlyUsage:
7.15.3.4 SOURce:BB:GRAPhics Subsystem
This subsystem contains the commands used to setup the graphical display.
[:SOURce<hw>]:BB:GRAPhics:MODE.............................................................................657
[:SOURce<hw>]:BB:GRAPhics:SMARt:STATe..................................................................657
[:SOURce<hw>]:BB:GRAPhics:SRATe:MODE..................................................................657
SOURce Subsystem

Table of Contents

Other manuals for Rohde & Schwarz SMU200A

Related product manuals