EasyManua.ls Logo

Rohde & Schwarz SMU200A - Source:frequency Subsystem

Rohde & Schwarz SMU200A
888 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote Control Commands
R&S
®
SMU200A
710Operating Manual 1007.9845.32 ─ 15
Parameters:
INT|EXT|INT,EXT
INTernal
<Source>
*RST:
FM:SOUR INT
selects the internal modulation source.
Example:
SCPI conformUsage:
[:SOURce<hw>]:FM:STATe <State>
The command activates/deactivates frequency modulation.
Activation of frequency modulation deactivates phase modulation.
Activation of FM (FM:STAT ON) deactivates phase modulation.
Parameters:
0|1|OFF|ON
OFF
<State>
*RST:
FM:STAT ON
Activates FM modulation.
Example:
SCPI conformUsage:
7.15.7 SOURce:FREQuency Subsystem
This subsystem contains the commands used to define the frequency settings for the RF
sources and sweeps.
[:SOURce<hw>]:FREQuency:CENTer..............................................................................711
[:SOURce<hw>]:FREQuency:LOSCillator:MODE..............................................................711
[:SOURce<hw>]:FREQuency:LOSCillator:OUTPut:STATe.................................................712
[:SOURce<hw>]:FREQuency[:CW|:FIXed]........................................................................713
[:SOURce<hw>]:FREQuency[:CW|:FIXed]:RCL................................................................713
[:SOURce<hw>]:FREQuency:MANual..............................................................................714
[:SOURce<hw>]:FREQuency:MODE................................................................................714
[:SOURce<hw>]:FREQuency:OFFSet..............................................................................715
[:SOURce<hw>]:FREQuency:PHASe:CONTinuous:HIGH..................................................716
[:SOURce<hw>]:FREQuency:PHASe:CONTinuous:LOW...................................................716
[:SOURce<hw>]:FREQuency:PHASe:CONTinuous:MODE.................................................716
[:SOURce<hw>]:FREQuency:PHASe:CONTinuous:STATe................................................717
[:SOURce<hw>]:FREQuency:SPAN.................................................................................717
[:SOURce<hw>]:FREQuency:STARt................................................................................718
[:SOURce<hw>]:FREQuency:STOP.................................................................................719
[:SOURce<hw>]:FREQuency:STEP[:INCRement].............................................................719
[:SOURce<hw>]:FREQuency:STEP:MODE......................................................................720
SOURce Subsystem

Table of Contents

Other manuals for Rohde & Schwarz SMU200A

Related product manuals