Rohde & Schwarz SMU200A - Parameters

Remote Control Commands
R&S
®
SMU200A
645Operating Manual 1007.9845.32 ─ 15
Parameters:
0|1|OFF|ON
OFF
<State>
*RST:
BB:DM:PRAM:STAT ON
switches power ramping on.
Example:
DM Lists
The following section brings together the commands for defining and managing the data
lists and control lists for digital modulation.
Lists are stored as files with specific file extensions in a user-definable directory (see
table 7-2). The directory which applies to the commands that follow is defined using the
command MMEMory:CDIR. Files in this directory can be accessed by quoting the file
name. The path and extension are not needed.
Table 7-2: Overview of the used list types
List type Content File extension
Data List Digital modulation data
*.dm_iqd
Control List Digital modulation control data
*.dm_iqc
User Standards User settings of digital modulation
*.dm_stu
Usr Filter Usr filter settings
*.vaf
User Mapping User mapping settings
*.vam
It is not possible to use other file extensions with the commands. Attempting to do so will
cause an error message. If the file extension is changed in any other way (e.g. by directly
accessing the file system) the lists are no longer recognized and therefore invalid.
List of Commands
[:SOURce<hw>]:BB:DM:CLISt:CATalog...........................................................................646
[:SOURce<hw>]:BB:DM:DLISt:CATalog...........................................................................646
[:SOURce<hw>]:BB:DM:FLISt:CATalog............................................................................646
[:SOURce<hw>]:BB:DM:MLISt:CATalog...........................................................................646
[:SOURce<hw>]:BB:DM:CLISt:FREE...............................................................................646
[:SOURce<hw>]:BB:DM:DLISt:FREE...............................................................................646
[:SOURce<hw>]:BB:DM:FLISt:FREE................................................................................646
[:SOURce<hw>]:BB:DM:MLISt:FREE...............................................................................646
[:SOURce<hw>]:BB:DM:CLISt:COPY...............................................................................647
[:SOURce<hw>]:BB:DM:DLISt:COPY...............................................................................647
[:SOURce<hw>]:BB:DM:CLISt:TAG.................................................................................647
[:SOURce<hw>]:BB:DM:DLISt:TAG.................................................................................647
[:SOURce<hw>]:BB:DM:CLISt:DATA...............................................................................648
[:SOURce<hw>]:BB:DM:CLISt:DELete.............................................................................648
[:SOURce<hw>]:BB:DM:CLISt:POINts.............................................................................649
[:SOURce<hw>]:BB:DM:CLISt:SELect.............................................................................649
[:SOURce<hw>]:BB:DM:DLISt:DATA...............................................................................650
SOURce Subsystem