Rohde & Schwarz SMU200A - Loading Instrument Settings

Instrument Function
R&S
®
SMU200A
159Operating Manual 1007.9845.32 ─ 15
These instrument settings are retained until a different instrument setting is stored in the
intermediate memory. When the instrument is switched off, the contents of the inter-
mediate memories are retained.
SCPI command:
*SAV on page 493
File Manager
Calls the "File Management" menu.
Directories can be created and files managed in this menu (see chapter 5.2.8.4, "File
Manager", on page 160).
SCPI command:
n.a.
5.2.8.3 Loading Instrument Settings
If "Recall" is selected under "Select Operation", the "File" menu provides options for
loading complete instrument settings. Here it is possible to select whether the current or
stored frequency and level settings are to be used.
Recent data sets
Displays the files last used. The entire path is shown.
If the desired file is in the list, it can be selected.
SCPI command:
n.a.
Directory
Enter the directory in which the file with the instrument setting to be loaded is located.
The "Selected file" window lists all the files in this directory.
SCPI command:
:MMEMory:CDIRectory on page 547
General Instrument Settings