Rohde & Schwarz SMU200A - Modulation Settings

Remote Control Commands
R&S
®
SMU200A
639Operating Manual 1007.9845.32 ─ 15
Parameters:
RCOSine|COSine|GAUSs|LGAuss|CONE|COF705|
COEQualizer|COFequalizer|C2K3x|APCO25|SPHase|
RECTangle|USER|PGAuss|LPASs|LPASSEVM|DIRac|
ENPShape|EWPShape|LTEFilter
GAUSs
<Type>
*RST:
BB:DM:FILT:TYPE COS
selects the Cosine filter type.
Example:
Modulation Settings
[:SOURce<hw>]:BB:DM:AQPSk:ANGLe...........................................................................639
[:SOURce<hw>]:BB:DM:ASK:DEPTh...............................................................................639
[:SOURce<hw>]:BB:DM:CODing.....................................................................................640
[:SOURce<hw>]:BB:DM:FORMat.....................................................................................640
[:SOURce<hw>]:BB:DM:FSK:DEViation...........................................................................641
[:SOURce<hw>]:BB:DM:FSK:VARiable:SYMBol<ch>:DEViation.........................................641
[:SOURce<hw>]:BB:DM:FSK:VARiable:TYPE...................................................................641
[:SOURce<hw>]:BB:DM:MDELay....................................................................................642
[:SOURce<hw>]:BB:DM:AQPSk:ANGLe <Angle>
For AQPSK modulation, sets the angle alpha between the point (0,0) and the I axis.
Parameters:
float
0 to 180
0
Deg
<Angle>
Range:
*RST:
Default unit:
BB:DM:FORM AQPS
selects modulation type AQPSK.
BB:DM:AQPS:ANGL 45
Example:
[:SOURce<hw>]:BB:DM:ASK:DEPTh <Depth>
The command sets the ASK modulation depth when modulation type ASK is selected.
Parameters:
float
0 to 100
0.1PCT
100PCT
PCT
<Depth>
Range:
Increment:
*RST:
Default unit:
SOURce Subsystem