Rohde & Schwarz SMU200A - Page 658

Remote Control Commands
R&S
®
SMU200A
638Operating Manual 1007.9845.32 ─ 15
Parameters:
0.05 to 0.99
0.01
0.20
0.0 to 0.99
0.01
0.35
0.15 to 2.5
0.01
0.3
0.05 to 2.0
0.01
0.5
0.05 to 2.0
0.01
0.5
0.15 to 2.5
0.01
0.3
0.0 to 0.99
0.01
0.35
0.15 to 2.5
0.01
2
<Apco25>
Range:
Increment:
*RST:
<Cosine>
Range:
Increment:
*RST:
<Gauss>
Range:
Increment:
*RST:
<Lpass>
Range:
Increment:
*RST:
<LpassEvm>
Range:
Increment:
*RST:
<Pgauss>
Range:
Increment:
*RST:
<Rcosine>
Range:
Increment:
*RST:
<Sphase>
Range:
Increment:
*RST:
BB:DM:FILT:PAR:APCO25 0.2
sets the roll-off factor to 0.2 for filter type APCO25.
Example:
[:SOURce<hw>]:BB:DM:FILTer:TYPE <Type>
The command selects the filter type.
When a standard is selected (:BB:DM:STAN), the filter type and filter parameter are set
to the default value.
SOURce Subsystem