Rohde & Schwarz SMU200A - Source Subsystem

Remote Control Commands
R&S
®
SMU200A
566Operating Manual 1007.9845.32 ─ 15
7.15 SOURce Subsystem
The SOURce subsystem contains the commands for configuring the digital and analog
signals.
SOURce<hw>
For one-path instruments, the keyword SOURce is optional and can be omitted.
The numeric suffix to SOURce distinguishes between multicarrier generation for path A
and path B in the case of two-path instruments:
●
SOURce[1] = Path A
The keyword SOURce is optional and can be omitted
●
SOURce2 = Path B
The keyword SOURce is mandatory, i.e. the command must contain the keyword with
suffix 2.
●
LF output = SOURce:LFOutput
The keyword SOURce is optional and can be omitted
With the R&S SMIQ generator family, the LF signal source is selected using the numerical
suffix 2 under SOURce. With this signal generator, however, SOURce2 selects RF output
B. The two instrument families are therefore incompatible with respect to actuation of the
LF generator.
● SOURce:AM Subsystem.......................................................................................567
● SOURce:AWGN Subsystem.................................................................................569
● SOURce:BB Subsystem.......................................................................................578
● SOURce:BBIN Subsystem....................................................................................690
● SOURce:CORRection Subsystem........................................................................698
● SOURce:FM Subsystem.......................................................................................707
● SOURce:FREQuency Subsystem.........................................................................710
● SOURce:INPut Subsystem...................................................................................720
● SOURce:IQ Subsystem........................................................................................723
● SOURce:IQ:OUTput Subsystem...........................................................................728
● SOURce:LFOutput Subsystem.............................................................................739
● SOURce:LIST Subsystem.....................................................................................747
● SOURce:MODulation Subsystem.........................................................................759
● SOURce:PATH Subsystem...................................................................................760
● SOURce:PHASe Subsystem................................................................................760
● SOURce:PM Subsystem.......................................................................................761
● SOURce:POWer Subsystem................................................................................764
● SOURce:PULM Subsystem..................................................................................772
● SOURce:ROSCillator Subsystem.........................................................................773
● SOURce:SWEep Subsystem................................................................................775
SOURce Subsystem