Rohde & Schwarz SMU200A - [:Source<Hw>]:Bb:DM:mlist:select; [:Source<Hw>]:Bb:DM:setting:catalog; [:Source<Hw>]:Bb:DM:setting:delete

Remote Control Commands
R&S
®
SMU200A
654Operating Manual 1007.9845.32 ─ 15
[:SOURce<hw>]:BB:DM:MLISt:SELect <Select>
The command selects the user mapping list in the default directory. The default directory
is set using command MMEM:CDIRectory. A path can also be specified, in which case
the files in the specified directory are selected. If a user mapping list with the specified
name does not yet exist, it is created. The file extension may be omitted. Only files with
the file extension *.vam will be selected or created.
Parameters:
<mapping_list_name><Select>
BB:DM:MLIS:SEL 'c_list1'
selects the user mapping list c_list1.
Example:
[:SOURce<hw>]:BB:DM:SETTing:CATalog?
This command reads out the files with Custom Digital Modulation settings in the default
directory. The default directory is set using command MMEM:CDIRectory. Only files with
the file extension *.dm will be listed.
Return values:
string<Catalog>
MMEM:CDIR 'D:/user/dig_mod'
sets the default directory.
BB:DM:SETT:CAT?
reads out all the files with Custom Digital Modulation settings in
the default directory.
Response: 'DM_1'
the file DM_1 with Custom Digital Modulation settings is available.
Example:
Query onlyUsage:
[:SOURce<hw>]:BB:DM:SETTing:DELete <Delete>
This command deletes the selected file with Custom Digital Modulation settings. The
directory is set using command MMEM:CDIRectory. A path can also be specified, in
which case the files in the specified directory are read. The file extension may be omitted.
Only files with the file extension *.dm will be deleted.
Setting parameters:
<file name><Delete>
BB:DM:STAN:ULIS:DEL 'DM_1'
deletes file DM_1.
Example:
Setting onlyUsage:
SOURce Subsystem