Manual Operation
R&S
®
SMU200A
115Operating Manual 1007.9845.32 ─ 15
Saving and loading of all instrument settings
All instrument settings are saved and loaded in the "File" menu.
To access the "File" menu, press the FILE (CTRL+S) key.
For more information, see chapter 5.2.8, "Storing and Loading Instrument Data - File
Key", on page 156.
4.7.1 File Select Dialog
The "Save/Recall" dialaog displays the available drives and directories. In the upper part,
"Recent Data Sets", the files last used are listed.
The available drives and directories and the files of the selected directory are displayed.
The currently selected path is displayed above the window. Only the relevant files without
file extensions are displayed. If the area is opened several times, the path last selected
is displayed. When a file is saved or created, its name is user-selectable; the extension
is assigned automatically and cannot be entered. The file is saved to the selected path.
In addition to the files saved by the user, some menus also offer files containing prede-
fined contents. These files are saved to a specific directory on system drive; for this rea-
son, this directory cannot be chosen from the "File Select" menu.
Example:
The following example shows the "File Select" menu of the GSM/EDGE digital standard
when "Recall Predefined Frames" is selected.
File Management
To Next Page
Loading...
