Rohde & Schwarz SMU200A - One Baseband Path and Two RF Paths

Getting Started
R&S
®
SMU200A
70Operating Manual 1007.9845.32 ─ 15
●
Generation of multicarrier signals with real time components
●
Simulation of antenna diversity
Fig. 3-5: Operation of R&S Signal Generator with two baseband generators and one RF path
3.2.3 One Baseband Path and Two RF Paths
An examples of the possible applications of an instrument equipped with one baseband
path and two RF paths is:
●
Generation of a modulated signal on path A and a CW interferer on path B.
Fig. 3-6: Operation of R&S Signal Generator with one baseband generator and two RF paths
Applications of the Instrument