Rohde & Schwarz SMU200A - Fully Equipped Two-Path Instrument

Getting Started
R&S
®
SMU200A
71Operating Manual 1007.9845.32 ─ 15
3.2.4 Fully Equipped Two-Path Instrument
Examples of the possible applications of a fully equipped two-path instrument are:
●
Generation of a wanted signal and an interfering signal for receiver tests
●
Generation of multicarrier signals with extremely wide bandwidth (>80 MHz)
●
Generation of fading scenarios with external I/Q signal
Fig. 3-7: Fully equipped two-path instrument
3.3
Baseband Section
The baseband section of the R&S Signal Generator is fully digital and contains the hard-
ware for generating and processing I/Q signals.
The baseband section may contain two paths.
For detailed information on available options, refer to the R&S SMU data sheet and the
R&S SMU configuration guide.
Up-to-date information is available at R&S SMU homepage on the internet http://
www2.rohde-schwarz.com/product/smu200a.html.
Baseband generator (option R&S SMU-B10)
The generator produces baseband signals. It contains modules for real time signal gen-
eration and an arbitrary waveform generator (ARB).
The different baseband options feature a different ARB memory size (see data sheet).
But apart from the memory size, all options have the same functionality and are installed
alternatively.
Baseband Section