Rohde & Schwarz SMU200A - Hcopy:file[:Name]; Hcopy:file[:Name]:Auto; Hcopy[:Execute]

Remote Control Commands
R&S
®
SMU200A
534Operating Manual 1007.9845.32 ─ 15
:HCOPy[:EXECute]
The command triggers the generation of a hardcopy.
The data is either written into a file or sent to the selected printer.
HCOP
triggers the generation of a hardcopy of the current display.
Example:
EventUsage:
:HCOPy:FILE[:NAME] <Name>
This command creates/selects a file into which the hardcopy will be stored. The path is
specified together with the file name. Access to the file via remote control is possible
using the commands of the MMEM-Subsystem. In contrast, command HCOPy:DATA?
transfers the hardcopy contents directly to the remote client where they can be further
processed.
If automatic file naming is activated, the hardcopy is stored into a file with an automatically
generated name (commands HCOPY:FILE[:NAME]:AUTO:…).
Parameters:
string<Name>
HCOP:FILE:NAME 'E:/HCopy'
defines the hardcopy file name.
Example:
:HCOPy:FILE[:NAME]:AUTO?
This command queries the path including the file name of the file with automatically gen-
erated name.
Return values:
string<Auto>
HCOP:DEV:LANG BMP
selects output format *,bmp.
HCOP:FILE:AUTO:DIR 'E:/HCopy'
defines the destination directory 'E:/HCopy'.
HCOP:FILE:AUTO:PREF 'gen'
the file name starts with the prefix 'gen'. The usage of automatic
naming with prefix and date in the file name is preset (…:STAT
ON).
HCOP
triggers the generation of a hardcopy of the current trace.
HCOP:FILE:AUTO?
queries the path including the file name
Response:
E:/HCopy/gen101012008001.bmp'
Example:
Query onlyUsage:
HCOPy Subsystem