Rohde & Schwarz SMU200A - 7.10 Hcopy Subsystem

Remote Control Commands
R&S
®
SMU200A
532Operating Manual 1007.9845.32 ─ 15
Parameters:
ASCii|BINary|HEXadecimal|OCTal
ASCii
The register content is returned as a decimal number.
BINary
The register content is returned as a binary number. #B is placed
in front of the number.
HEXadecimal
The register content is returned as a hexadecimal number. #H is
placed in front of the number.
OCTal
The register content is returned as an octal number. #Q is placed
in front of the number.
ASCii
<Sregister>
*RST:
FORM:SREG HEX
The register content is returned as a hexadecimal number.
Example:
SCPI conformUsage:
7.10 HCOPy Subsystem
The HCOPy subsystem contains the commands to generate a hardcopy of the display.
:HCOPy:DATA...............................................................................................................533
:HCOPy:DEVice.............................................................................................................533
:HCOPy:DEVice:LANGuage............................................................................................533
:HCOPy[:EXECute]........................................................................................................534
:HCOPy:FILE[:NAME].....................................................................................................534
:HCOPy:FILE[:NAME]:AUTO...........................................................................................534
:HCOPy:FILE[:NAME]:AUTO:DIRectory...........................................................................535
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar.................................................................535
:HCOPy:FILE[:NAME]:AUTO:FILE...................................................................................535
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY..........................................................................536
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe...............................................................536
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh.....................................................................536
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe..........................................................537
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer....................................................................537
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix.....................................................................537
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe..........................................................537
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR.......................................................................538
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe............................................................538
:HCOPy:FILE[:NAME]:AUTO:STATe................................................................................538
:HCOPy:IMAGe:FORMat................................................................................................538
:HCOPy:IMAGe:SIZE.....................................................................................................539
:HCOPy:PRINter:LIST....................................................................................................539
:HCOPy:PRINter[:NAME]................................................................................................539
:HCOPy:PRINter:PAGE:MARGins...................................................................................539
HCOPy Subsystem