Rohde & Schwarz SMU200A - Power Ramp

Remote Control Commands
R&S
®
SMU200A
642Operating Manual 1007.9845.32 ─ 15
BB:DM:FORM FSKV
selects Variable FSK modulation.
BB:DM:FSK:VAR:TYPE FSK16
selects 16FSK modulation.
Example:
[:SOURce<hw>]:BB:DM:MDELay?
The command queries the digital modulation delay from the data input to the I/Q output
in the case of external modulation.
Return values:
float<Mdelay>
BB:DM:MDEL?
queries the delay in the case of external modulation.
Response: 0.4 ms
the delay is 0.4 ms.
Example:
Query onlyUsage:
Power Ramp
[:SOURce<hw>]:BB:DM:PRAMp:ATTenuation..................................................................642
[:SOURce<hw>]:BB:DM:PRAMp:BBONly[:STATe]............................................................643
[:SOURce<hw>]:BB:DM:PRAMp:FDELay.........................................................................643
[:SOURce<hw>]:BB:DM:PRAMp:RDELay.........................................................................643
[:SOURce<hw>]:BB:DM:PRAMp:SHAPe..........................................................................644
[:SOURce<hw>]:BB:DM:PRAMp:SOURce........................................................................644
[:SOURce<hw>]:BB:DM:PRAMp:TIME.............................................................................644
[:SOURce<hw>]:BB:DM:PRAMp[:STATe].........................................................................644
[:SOURce<hw>]:BB:DM:PRAMp:ATTenuation <Attenuation>
The command sets the level attenuation for signal ranges that are flagged with level
attribute attenuated by the LEV_ATT control signal.
Parameters:
float
0.0 to 70
0.01
15
dB
<Attenuation>
Range:
Increment:
*RST:
Default unit:
BB:DM:PRAM:ATT 15 dB
sets a level attenuation of 15 dB.
Example:
SOURce Subsystem