Rohde & Schwarz SMU200A - [:Source<Hw>]:Bb:arb:wsegment:sequence:select

Remote Control Commands
R&S
®
SMU200A
620Operating Manual 1007.9845.32 ─ 15
Setting parameters:
ON|OFF
activates/deactivates the appended segment
ON
integer
indicates the number of the segment as in the multi segment
waveform file
0 to SegmentCount - 1
1
0
integer
defines how many times this segment is repeated
1 to 65535
1
1
NEXT|BLANk|ENDLess|SEG0|SEG1|SEG2|SEG3|SEG4|SEG5|
SEG6|SEG7|SEG8|SEG9|SEG10|SEG11|SEG12|SEG13|
SEG14|SEG15|SEG16|SEG17|SEG18|SEG19|SEG20|SEG21|
SEG22|SEG23|SEG24|SEG25|SEG26|SEG27|SEG28|SEG29|
SEG30|SEG31
determines the action after completing the current segment, like
for instance which segment is processed after the processing of
the current one is finished.
NEXT
<State>
*RST:
<Segment>
Range:
Increment:
*RST:
<Count>
Range:
Increment:
*RST:
<Next>
*RST:
BB:ARB:WSEG:SEQ:SEL 'D:
/user/waveform/play_list_1’
selects the sequencing list play_list_1.wvs.
BB:ARB:WSEG:SEQ:APP ON,3,15,BLANK
appends the segment number 3 as a new segment to the sequenc-
ing list; this segment is activated and will be repeated 15 times and
followed by a blank segment.
Example:
Setting onlyUsage:
[:SOURce<hw>]:BB:ARB:WSEGment:SEQuence:SELect <Select>
Selects the sequencing list (files with extension *.wvs)
Parameters:
<filename<Select>
BB:ARB:WSEG:SEQ:SEL 'D:
/user/waveform/play_list_1’
selects the sequencing list play_list_1.wvs.
Example:
SOURce Subsystem