Rohde & Schwarz SMU200A - Kboard Subsystem

Remote Control Commands
R&S
®
SMU200A
540Operating Manual 1007.9845.32 ─ 15
HCOP:PRIN:PAGE:UNIT IN
sets the physical unit for the page layout values to inches.
HCOP:PRIN:PAGE:MARG 2.5,2.0,1.5,1.5
sets the margin values of the page layout to top=2.5 inches, bot-
tom=2.0 inches, left=1.5 inches and right=.1.5 inches.
Example:
:HCOPy:PRINter:PAGE:ORIentation <Orientation>
The command defines the orientation of the printer page..
Parameters:
PORTrait|LANDscape
PORTrait
<Orientation>
*RST:
HCOP:PRIN:PAGE:ORI LAND
selects landscape orientation for the printer page.
Example:
:HCOPy:PRINter:PAGE:SIZE <Size>
The command selects the size of the printer paper.
Parameters:
LETTer|LEGal|EXECutive|A4|A5
LETTer
<Size>
*RST:
HCOP:PRIN:PAGE:SIZE LETT
sets the page size to letter format.
HCOP:PRIN:PAGE:SIZE?
returns the selected page size, e.g. LETT
Example:
:HCOPy:PRINter:PAGE:UNIT <Unit>
This command defines the physical unit used for defining the page size and margins.
Parameters:
CM|IN
CM
<Unit>
*RST:
HCOP:PRIN:PAGE:UNIT IN
selects unit inch.
Example:
7.11 KBOard Subsystem
The KBOard system contains the commands to set the external keyboard.
:KBOard:LANGuage.......................................................................................................541
KBOard Subsystem