Rohde & Schwarz SMU200A - [:Source<Hw>]:Bb:DM:clist:copy; [:Source<Hw>]:Bb:DM:clist:tag; [:Source<Hw>]:Bb:DM:dlist:copy; [:Source<Hw>]:Bb:DM:dlist:tag

Remote Control Commands
R&S
®
SMU200A
647Operating Manual 1007.9845.32 ─ 15
BB:DM:FORM USER
selects the User modulation type.
BB:DM:FLIS:FREE?
queries the free memory.
Example:
Query onlyUsage:
[:SOURce<hw>]:BB:DM:CLISt:COPY <Copy>
[:SOURce<hw>]:BB:DM:DLISt:COPY <Copy>
The command copies the selected data list into the data list specified by <list name>. If
a data list with the specified name already exists, it is overwritten. If it does not yet exist,
it is created.
The source file has to be available in the default directory. The default directory is set
using command MMEM:CDIRectory. A path can be specified, in which case the source
file is copied into the file <list name> in the specified directory. The file extension may be
omitted.
Only files with the file extension *.dm_iqc will be copied (see also table 7-2).
Setting parameters:
<list name><Copy>
BB:DM:DLIS 'd_list1'
selects data list d_list1.
BB:DM:DLIS:COPY 'd_list2'
copies the content of data list d_list1 into data list d_list2.
Any existing content in data list d_list2 is overwritten.
Example:
Setting onlyUsage:
[:SOURce<hw>]:BB:DM:CLISt:TAG? <control_list_name>,<tag_name>
[:SOURce<hw>]:BB:DM:DLISt:TAG? <control_list_name>,<tag_name>
The command queries the content of the specified tag in the selected file.
Return values:
string<Tag>
BB:DM:DLIS:TAG 'D_list1','date'
queries the Date tag in control list D_list1.
Response:10.10.2008
the data list was created on 10.10.2008.
Example:
Query onlyUsage:
SOURce Subsystem