Rohde & Schwarz SMU200A - Source:bbin Subsystem

Remote Control Commands
R&S
®
SMU200A
690Operating Manual 1007.9845.32 ─ 15
BB:CFAC
queries the crest factor of the baseband signal.
Example:
Query onlyUsage:
[:SOURce<hw>]:BB:POWer:PEAK?
This command queries the peak level of the baseband signal relative to full scale of 0.5
V (in terms of dB full scale).
Return values:
float
dBfs
<Peak>
Default unit:
BB:POW:PEAK
queries the peak level of the baseband signal.
Example:
Query onlyUsage:
[:SOURce<hw>]:BB:POWer:RMS?
This command queries the rms level of the baseband signal relative to full scale of 0.5V
(in terms of dB full scale).
Return values:
float
dBfs
<Rms>
Default unit:
BB:POW:RMS
queries the rms level of the baseband signal.
Example:
Query onlyUsage:
7.15.4 SOURce:BBIN Subsystem
The SOURce:BBIN subsystem contains the commands for setting the external digital and
analog baseband signals.
The external baseband signal A can be routed to path A, path B, or both paths. The
external baseband signal B can be routed to path B only.
[:SOURce]:BBIN:ALEVel:EXECute..................................................................................691
[:SOURce<hw>]:BBIN:CDEVice......................................................................................691
[:SOURce]:BBIN:CFACtor...............................................................................................691
[:SOURce]:BBIN:FOFFset...............................................................................................692
[:SOURce<hw>]:BBIN:GIMBalance..................................................................................692
[:SOURce]:BBIN:IQSWap[:STATe]..................................................................................692
[:SOURce<hw>]:BBIN:MODE..........................................................................................693
[:SOURce<hw>]:BBIN:MPERiod......................................................................................693
[:SOURce<hw>]:BBIN:OFFSet:I......................................................................................693
[:SOURce<hw>]:BBIN:OFFSet:Q.....................................................................................693
SOURce Subsystem