Rohde & Schwarz SMU200A - Keypad for Data Entry

Preparing for Use
R&S
®
SMU200A
23Operating Manual 1007.9845.32 ─ 15
●
Closes all kinds of dialog boxes, if the edit mode is not active.
●
Quits the edit mode, if the edit mode is active.
●
Switches between different entry fields of a menu.
●
Shifts the entry cursor from the header display to the previously active menu, or to
the previously highlighted block in the block diagram if no menu is active.
●
Shifts the cursor from a function block in the diagram to the first item in the "Win-
bar". If no menus are open, the current cursor position remains unchanged.
MENU
Calls the menu tree.
TOGGLE
●
Switches highlighted elements or a function block on and off.
●
Switches between two or more settings, e.g. items of selection lists. At the end of a
list, the cursor is set on the first entry again.
CLOSE
Closes the active menu.
●
If the entry mode is active, changes are cancelled.
●
If settings in this menu require acknowledgement by means of an "Accept" button, a
query is displayed asking whether the changes made should be cancelled.
HIDE
Minimizes the active open menu. The associated button in the "Winbar" remains visible.
REARR
Automatic rearrangement of open menus.
WINBAR
Toggles between display and blanking of the "Winbar".
2.1.5 Keypad for data entry
The keys in the data entry keypad are used to enter alphanumeric data and units.
Data entry keys are only enabled while the cursor is placed on a data input field in a
dialog. Their function depends on the data type of the input field.
Front Panel Tour