Rohde & Schwarz SMU200A - Extensions for User Files

Remote Control Commands
R&S
®
SMU200A
543Operating Manual 1007.9845.32 ─ 15
7.12.2 Extensions for User Files
The following table list all available file extensions for user files. The currently available
files on the instrument depends on the installed options.
Table 7-1: List of the automatically assigned file extensions in the instrument
Function/Digital
Standard
List type Contents File suffix
Instrument State Settings Instrument settings
*.savrcl
"User Correction" List User-defined level correction values
*.uco
"List Mode" List User-defined frequency/level value pairs
*.lsw
"Frequency
Response Correc-
tion"
Settings User-defined frequency response correction file
*.frc
"Arbitrary Waveform
Generator"
Waveform ARB waveforms
ARB multi segment waveforms
*.wv
Waveform ARB multi carrier settings
*.arb_mult
carr
Configuration
data
Configuration file for creation of multisegment
ARB waveforms
*.inf_mswv
Play List ARB Sequencing List
*.wvs
"DM" Data List Digital modulation data
*.dm_iqd
*.tdm
Control List Data to control digital modulation
*.dm_iqc
Settings Digital modulation settings
*.dm
User Standard Digital modulation user standard
*.dm_stu
User Mapping Digital modulation user mapping
*.vam
User Filter Digital modulation user filter
*.vaf
"NRP Settings" Settings NRP Settings
*.nrp
EX-IQ-Box User Settings EX-IQ-Box User Defined Settings
*.iqbox
"Fading" Fading Fading data
*.fad
"GSM/EDGE" Settings GSM/EDGE settings
*.gsm
Slot User-defined slot data
*.gsm_slu
Frame User-defined frame data
*.gsm_fu
Slot Higher symbol rate slot
*.gsm_hslu
Frame Higher symbol rate frame
*.gsm_hfu
"Bluetooth" Bluetooth Set-
tings
Complete setting of the Bluetooth menu
*.bto
"TETRA" TETRA Set-
tings
Complete setting of the TETRA menu
*.tetra
MMEMory Subsystem