Rohde & Schwarz SMU200A - Hcopy:file[:Name]:Auto[:File]:Number; Hcopy:file[:Name]:Auto[:File]:Prefix

Remote Control Commands
R&S
®
SMU200A
537Operating Manual 1007.9845.32 ─ 15
Query onlyUsage:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe <State>
This command activates the usage of the month in the automatic file name.
Parameters:
0|1|OFF|ON
ON
<State>
*RST:
HCOP:FILE:AUTO:MONT:STAT OFF
deactivates the usage of the month in the automatic file name.
Example:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?
This command queries the number in the automatic file name. The number is assigned
in such a way that always the lowest possible value for an unique file name within the
selected path is used.
Return values:
float<Number>
HCOP:FILE:AUTO:NUMB?
queries the number in the automatic file name.
Example:
Query onlyUsage:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix <Prefix>
This command defines the prefix part in the automatic file name. The usage of the prefix
is activated with command HCOP:FILE:AUTO:PREF:STAT ON.
Parameters:
string
HCopy
<Prefix>
*RST:
HCOP:FILE:AUTO:PREF 'Snapshot'
appends "Snapshot" as prefix to the generated file name.
Example:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe <State>
This command activates the usage of the prefix in the automatic file name. The prefix is
entered with command HCOP:FILE:AUTO:PREF.
Parameters:
0|1|OFF|ON
ON
<State>
*RST:
HCOPy Subsystem