Rohde & Schwarz SMU200A - Hcopy Subsystem; Hcopy:data; Hcopy:device:language

Remote Control Commands
R&S
®
SMU200A
533Operating Manual 1007.9845.32 ─ 15
:HCOPy:PRINter:PAGE:ORIentation................................................................................540
:HCOPy:PRINter:PAGE:SIZE..........................................................................................540
:HCOPy:PRINter:PAGE:UNIT..........................................................................................540
:HCOPy:DATA?
The commands transfers the hardcopy data directly as a NByte stream to the remote
client.
Return values:
string<Data>
HCOP:DEV:LANG JPG
HCOP:DATA?
transfers the hardcopy to the remote client.
Example:
Query onlyUsage:
:HCOPy:DEVice <Device>
The command selects the destination to which the hardcopy (snapshot) should be trans-
ferred to. The hardcopy either can be printed out by selecting PRINter or can be saved
in a file by selecting FILE.
Parameters:
FILE | PRINter
FILE
<Device>
*RST:
HCOP:DEV FILE
the hardcopy will be stored in a file.
Example:
:HCOPy:DEVice:LANGuage <Language>
The command selects the bitmap graphic format for the screenshot. It is also possible to
directly retrieve the data using command HCOP:DATA?. This command is an alias to
command HCOPy:IMAGe:FORMat.
Parameters:
BMP|JPG|XPM|PNG
BMP
<Language>
*RST:
HCOP:DEV:LANG BMP
selects bitmap as image format.
HCOP:FILE 'E:/HCopy'
defines the directory, path and file name for storing the hardcopy.
HCOP
triggers the hardcopy generation.
Example:
HCOPy Subsystem