Rohde & Schwarz SMU200A - [:Source<Hw>]:Bb:DM:setting:load; [:Source<Hw>]:Bb:DM:setting:store; [:Source<Hw>]:Bb:DM:standard:ulist:catalog

Remote Control Commands
R&S
®
SMU200A
655Operating Manual 1007.9845.32 ─ 15
[:SOURce<hw>]:BB:DM:SETTing:LOAD <Load>
This command loads the selected file with Custom Digital Modulation settings. The direc-
tory is set using command MMEM:CDIRectory. A path can also be specified, in which
case the files in the specified directory are read. The file extension may be omitted. Only
files with the file extension *.dm will be loaded.
Setting parameters:
string<Load>
BB:DM:STAN:ULIS:LOAD 'DM_1'
loads file DM_1.
Example:
Setting onlyUsage:
[:SOURce<hw>]:BB:DM:SETTing:STORe <Store>
This command stores the current Custom Digital Modulation settings into the selected
file. The directory is set using command MMEM:CDIRectory. A path can also be speci-
fied, in which case the files in the specified directory are read. Only the file name has to
be entered. User Standards are stored as files with the specific file extensions *.dm.
Setting parameters:
<file name><Store>
BB:DM:STAN:ULIS:STOR 'DM_QAM'
stores the current Custom Digital Modulation settings into file
DM_QAM.
Example:
Setting onlyUsage:
[:SOURce<hw>]:BB:DM:STANdard:ULISt:CATalog?
This command reads out the files with Digital Standard settings in the default directory.
The default directory is set using command MMEM:CDIRectory. Only files with the file
extension *.dm_stu will be listed.
Return values:
string<Catalog>
MMEM:CDIR 'D:/user/dig_mod'
sets the default directory.
BB:DM:STAN:ULIS:CAT?
reads out all the files with Digital Standard settings in the default
directory.
Response: 'DM_QAM'
the file DM_QAM with Digital Standard settings is available.
Example:
Query onlyUsage:
SOURce Subsystem