Rohde & Schwarz SMU200A - Page 669

Remote Control Commands
R&S
®
SMU200A
649Operating Manual 1007.9845.32 ─ 15
Setting parameters:
<list name><Delete>
BB:DM:CLIS:DEL 'c_list3'
deletes control list c_list3.
Example:
Setting onlyUsage:
[:SOURce<hw>]:BB:DM:CLISt:POINts?
The command queries the number of lines (2 bytes) in the currently selected list.
Return values:
float<Points>
BB:DM:CLIS:SEL "c_list1"
selects control list c_list1.
BB:DM:CLIS:POIN?
queries the number of lines in the control list.
Response: 20
the control list consists of 20 lines.
Example:
Query onlyUsage:
[:SOURce<hw>]:BB:DM:CLISt:SELect <Select>
The command selects the control list in the default directory. The default directory is set
using command MMEM:CDIRectory. A path can also be specified, in which case the
files in the specified directory are selected. If a control list with the specified name does
not yet exist, it is created. The file extension may be omitted. Only files with the file
extension *.dm_iqc will be selected or created.
Setting parameters:
<list name><Select>
BB:DM:CLIS:SEL 'c_list1'
selects control list c_list1.
Example:
Setting onlyUsage:
SOURce Subsystem