Remote Control Basics
R&S
®
SMU200A
459Operating Manual 1007.9845.32 ─ 15
6. Enter the IP address or the host name of the R&S SMU and select "Next".
7. Enter the alias name if required.
The alias name must not be mistaken for the computer name. It is only used for
instrument identification within the program and displayed in the menu as an option
in case of an Ethernet link.
8. Confirm the settings with "Finish".
The instrument is configured and the settings are displayed in the "TCP/IP Set-
tings" tab.
Starting a Remote Control Session
To Next Page
Loading...
