Rohde & Schwarz SMU200A - Page 769

Remote Control Commands
R&S
®
SMU200A
749Operating Manual 1007.9845.32 ─ 15
[:SOURce<hw>]:LIST:DELete <Delete>
The command deletes the specified list.
The files are stored with the fixed file extensions *.lsw in a directory of the user's choice.
The directory applicable to the command is defined with the command MMEMory:CDIR.
To access the files in this directory, only the file name has to be given, without the path
and the file extension. A path can also be specified in command :SOUR:LIST:CAT?, in
which case the file in the specified directory is deleted.
*RST does not affect data lists.
Setting parameters:
<list file name><Delete>
MMEM:CDIR 'D:/Lists/Listmode'
selects the directory for the list mode files.
LIST:DEL 'LIST1'
deletes the list list1.
Example:
Setting onlyUsage:
[:SOURce<hw>]:LIST:DELete:ALL
The command deletes all lists in the set directory. The List mode must be deactivated
beforehand to ensure that no lists are selected when this command is called
(SOUR:FREQ:MODE CW or SWE).
The files are stored with the fixed file extensions *.lsw in a directory of the user's choice.
The directory applicable to the command is defined with the command MMEMory:CDIR.
A path can also be specified in command SOUR:LIST:CAT?, in which case all list mode
files in the specified directory are deleted.
*RST does not affect data lists.
MMEM:CDIR 'D:/Lists/Listmode'
selects the directory for the list mode files.
FREQ:MODE SWE
deactivates the List mode for RF output and activates the Sweep
mode.
SOUR2:FREQ:MODE SWE
deactivates the List mode for RF output and activates Sweep
mode.
LIST:DEL:ALL
deletes all list mode files available in the set directory.
Example:
EventUsage:
SOURce Subsystem