HIGH DATA RATE RECEIVER
HDR-4G+ USER’S MANUAL
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
© Safran Data Systems – IMP000074 e14r1
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
In 8PSK mode, the following additional parameters appear at the GUI:
Select CCSDS (Counter Clock Wise) or Inverted (Clock Wise). (see section
3.6.2.2 )
Select Natural, Natural2, Gray1, Gray2, Gray3, Gray4, Gray5 or Gray6
mapping (see section 3.6.2.2 )
In 16QAM mode, the following additional parameter appears at the GUI:
Select Map 1, Map 2 or Map 3(see section 3.6.2.2 )
In 16APSK mode, the following additional parameter appears at the GUI:
Allow to adjust R2/R1 of the 16APSK constellation
Select Map 1 or Map 2 (see section 3.6.2.2 )
In 32APSK mode, the following additional parameter appears at the GUI:
Allow to adjust R2/R1 of the 32APSK constellation
Allow to adjust R3/R1 of the 32APSK constellation
In 64APSK mode, the following additional parameter appears at the GUI:
Allow to adjust R2/R1 of the 64APSK constellation
Allow to adjust R3/R1 of the 64APSK constellation
Allow to adjust R4/R1 of the 64APSK constellation
In DVB-S2 and SCCC modes, the demodulation mode is controlled from the Physical Layer window.
In Multi DPU mode, the following additional parameter appears at the GUI:
Select 0 or 1 for th emulti-DPU processing mapping (refer to paragrah 3.4.13)
To Next Page
Loading...
