This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Connect the DPU with DMU 1
Connect the DPU with DMU 2
Input external data (Data + Clock) in DPU only with menu 30
and 31
Connect the DPU input with the merged I&Q output of the
selected DMU
Connect the DPU input with the I of the selected DMU
Connect the DPU input with the Q of the selected DMU
Connect the DPU input with the I of the selected DMU and
take one data on two
Connect the DPU input with the Q of the selected DMU and
take one data on two
Connect the DPU input with the I of the selected DMU and
take one data on four
Connect the DPU input with the Q of the selected DMU and
take one data on four
Both ECL data inputs are merged and sampled on the rising
edge of the clock
Select ECL data input 1 and sample on the rising edge of the
clock
Select ECL data input 2 and sample on the rising edge of the
clock
Both ECL data inputs are merged and sampled on the falling
edge of the clock
Select ECL data input 1 and sample on the falling edge of the
clock
Select ECL data input 2 and sample on the falling edge of the
clock
Header RS(6,10) ENABLE or DISABLE
Reed Solomon decoding of the header of the transfer frames in AOS CCSDS
OFF
CCSDS CCSDS derandomization
Custom Customized derandomization applied before decoding
Custom after decoding Customized derandomization applied after decoding
To Next Page
Loading...
