Siemens SINUMERIK 828D Turning - Page 790

Ladder Viewer and Ladder add-on (828D only)
23.6 Displaying information on the program blocks
Turning
790 Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Further information
● Properties
Name of the block, author, number of the subprogram, data class, date it was generated,
date of the last change and comment.
● Local variable
Name of the variable, variable type, data type and comment.
Access protection
If a program block is password-protected. The ladder diagram display
can be enabled using the "Protection" softkey.
Displaying the program status
1. Press the "Program stat. OFF" softkey to hide the program status in the
status display.
2. Press the "Program stat. ON" softkey to unhide the program status in
the status display.
Display progress status
If your PLC has the function "Progress status" available, the status values are displayed at
the time of execution of the operations. The status of the local data memory and the
accumulators is also displayed.
1. Press the "Program stat. OFF" softkey to hide the program status in the
status display.
2. Press the "Program stat. ON" softkey to unhide the program status in
the status display.
Change colors for displaying of progress or program status
In progress status, different colors are used to display information.
Display Color
Signal flow of power rail, when status active Blue
Signal flow in the networks Blue
All operations that are active and that are executed without
error (corresponds to signal flow)
Blue
Status of the Boolean operations (corresponds to signal
flow)
Blue