Siemens SINUMERIK 828D - Page 279

Creating a ShopTurn program
8.18 Example: Standard machining
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
279
Stock removal contour
6. Solid machine residual material
1.
Press the "Cont. turn." and "St. remov. resid." softkeys.
The "Stock removal residual material" input window opens.
2.
Enter the following technology parameters:
T Roughing tool_55 D1
F 0.35 mm/rev
V 400 m/min
3.
Enter the following parameters:
Machining
Roughing (∇)
Machining direction
Longitudinal
Position
outside
Machining direction
D
2
inc
Cutting depth
UX
0.4
inc
UZ
0.2
inc
DI
0
Relief cuts
Yes
FR
0.200
mm/rev
Set machining area limits
No
4.
Press the "Accept" softkey.