Sony MVS-8000X SystemMVS-7000X System - Page 229

USO RESTRITO
Color Background 229
Chapter
8
Color
Backgrounds,
Copy
and
Swap,
and
Other
Settings
Ptn Select menu (standard wipe patterns 1 to 24), and
you can then adjust the following parameters.
Knob
Parameter
Adjustment
Setting values
1
Size
Pattern size
0.00 to 100.00
2
Soft
Edge softness
0.00 to 100.00
3 To adjust color 1, set [Color 1] on, and to adjust color
2 set [Color 2] on, then adjust the parameters.
Knob
Parameter
Adjustment
Setting values
1
Luminance
Luminance
0.00 to 100.00
2
Saturation
Saturation
0.00 to 100.00
3
Hue
Hue
359.99 to 0.00
4 If required, set the pattern modifiers.
When turning [Position] on and setting the pattern
position
Knob
Parameter
Adjustment
Setting values
1
Position H
Horizontal
position
–200.00 to
+200.00
a)
2
Position V
Vertical position
–200.00 to
+200.00
a)
a) See page 169.
When turning [Multi] on and using replications of
the same pattern
Knob
Parameter
Adjustment
Setting values
1
H Multi
Number of
repetitions of
pattern
horizontally
1 to 63
2
V Multi
Number of
repetitions of
pattern vertically
1 to 63
3
Invert Type
Replication
layout
1 to 4
a)
a) See page 171.
When turning [Aspect] on and setting the aspect
ratio of the pattern
Knob
Parameter
Adjustment
Setting values
1
Aspect
Aspect ratio
–100.00 to
+100.00
a)
a) See page 171.
When turning [Pairing] on and making a wipe
pattern like a Venetian blind
When turning [Angle] on in the <Rotation> group
and slanting the pattern
Knob
Parameter
Adjustment
Setting values
1
Angle
Angle of pattern
rotation
–100.00 to
+100.00
a)
a) See page 170.
When turning [Speed] on in the <Rotation> group
and rotating the pattern at a constant rate
Knob
Parameter
Adjustment
Setting values
1
Speed
Rotation rate of
pattern
–100.00 to
+100.00
a)
a) See page 170.
When selecting H (horizontal) or V (vertical) in the
<Modulation> group and applying waviness to the
pattern
(The modulation is always a sine wave.)
Notes
When using 1080PsF mode in an HD system, the
modulation function is not available.
Knob
Parameter
Adjustment
Setting values
1
Amplitude
Amplitude of
modulation
0.00 to 100.00
2
Frequency
Frequency of
modulation
0.00 to 100.00
3
Speed
Speed of waves
–100.00 to
+100.00
a)
a) See “Applying modulation to the wipe pattern (Modulation)” (page
172).
5 To interchange color 1 and color 2, press [Color
Invert], turning it on.
Knob
Parameter
Adjustment
Setting values
1
Width
Width of the slits
1 to 128
(integer)