Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-94
033-799
Fax Codec Error 033-799
Maximum number of received
lines for one page exceeded.
Job canceled. Remote device
will try again.
*Caution screen with Close
button
<Fax Codec Error>
Cause:
In MH,HR,MMR receive, exceed the
maximum number of received lines for
1 page.
FIP 1. 223
034-508
Fax Communication Error
034-508
Refused command signal sent
Job canceled. Please try again.
*Caution screen with Close
button
<Command Refuse Signal Send>
Cause:
Send command refuse signal to stop
communication.
The sender discontinued the commu-
nication.
FIP 1. 224
034-515
Fax Communication Error
034-515
Digital identification signal or
Digital command signal had
illegal command.
Job canceled. Remote device
will try again.
*Caution screen with Close
button
<DIS DCS Illegal Command Receive>
Cause:
Receive illegal command such as DIS,
DCS receive from calling terminal in
spite of having no ability to receive.
FIP 1. 225
034-791
No Answer 034-791
Check Line Connection. Please
disconnect and reconnect fax
line to insure proper connection.
Job canceled.
*Caution screen with Close
button
<Check Line Connection>
Cause:
The Telephone Line Connection Error.
FIP 1. 226
034-799
Fax Number Error 034-799
No dial Data, please confirm
and enter fax number or try
again.
Job canceled.
*Caution screen with Close
button
<No Dial Data>
Cause:
Auto dial is activated but no dial data
exist.
FIP 1. 227
Status
Code
(3615)
LCD Display Name/Description of Error FIP
To Next Page
Loading...
