Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-160
FIP 1. 82
017-976 FAX Controller Error
Cause:
Exceed the maximum number of controlled files.
Solution:
The machine will recover after the OK button is pressed or message is displayed for specified
time.
If the error persists:
1. Wait until the Pending FAX Jobs will be sent, or delete the Pending FAX data.
2. Divide the FAX data into smaller blocks or convert the data to a smaller format.
3. Update to the latest F/W.
4. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
•(REP 5.4 Fax PWB)
•(REP 5.1 ESS PWB)
FIP 1. 83
017-977 FAX Controller Error
Cause:
Exceed the maximum number of controlled documents.
Solution:
The machine will recover after the OK button is pressed or message is displayed for specified
time.
If the error persists:
1. Wait until the Pending FAX Jobs will be sent, or delete the Pending FAX data.
2. Divide the FAX data into smaller blocks or convert the data to a smaller format.
3. Update to the latest F/W.
4. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
•(REP 5.4 Fax PWB)
•(REP 5.1 ESS PWB)