Xerox Phaser 3610

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-282
FIP 1. 300
116-315 ESS On Board RAM W/R Check Fail
Cause:
Detected by On Board RAM W/R Check at the time of initialization.
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace (REP 5.1 ESS PWB).
FIP 1. 301
116-317 ESS ROM Check (Main) Fail
Cause:
Main Program ROM checksum error.
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace (REP 5.1 ESS PWB).
FIP 1. 302
116-317 ESS ROM Check (Main) Fail
Cause:
Detected by master NVRAM W/R check.
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Replace (REP 5.1 ESS PWB).