Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-179
FIP 1. 121
031-521 SMB Error
Cause:
In SMB scan, login-able workstation is restricted.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. About user settings, confirm the following with the system administrator. Restriction on login-
able workstation.
2. Perform the following in sequence.
• " Network System Fault Check"
• " Network-related Details Check Flow"
3. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace (REP 5.1 ESS PWB).
FIP 1. 122
031-522 SMB user authentication fail or SMB Scanner login fail
Cause:
In SMB scan, login access is rejected. Request is not allowed.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. About user settings, confirm the following with the system administrator. Restriction on login-
able workstation.
2. Perform the following in sequence.
• " Network System Fault Check"
• " Network-related Details Check Flow"
3. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace (REP 5.1 ESS PWB).