Xerox Phaser 3610

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-275
FIP 1. 290
091-914 IOT Drum Communication Fail
091-915 Drum CRUM Data Broken Fail
091-921 IOT Drum Detached
091-963 IOT Drum CRUM ID Error
Cause:
091-914: Communication failure with Drum CRUM was detected.
091-915: Malfunction of Drum CRUM was detected.
091-921: It was detected that the Drum CRUM is not at the specified position.(Loose CRUM)
091-963: The Drum CRUM ID error was detected.
8
•Replace (REP 7.5 Optional Tray PWB Assembly)
• Does an error occur?
Go to Step 9.
Troubleshooting
complete.
9
•Replace (REP 7.8 Feeder Assembly).
• Does an error occur?
Replace
(REP 5.6
MCU PWB)
Troubleshooting
complete.
Step Check and Action Yes No