Xerox Phaser 3610

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-227
FIP 1. 216
033-782 NSS/DCS Function disagreement
Cause:
Received NSS/DCS function disagrees with capability of own terminal.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Set the Modem Speed correctly.
2. Update to the latest F/W.
3. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
•(REP 5.4 Fax PWB)
•(REP 5.1 ESS PWB)
FIP 1. 217
033-784 Fax Codec Error
Cause:
In FAX receive, JBIG decode output buffer overflow.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check the sending side fax machine or retry sending by lowering the resolution setting.
2. Update to the latest F/W.
3. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
•(REP 5.4 Fax PWB)
•(REP 5.1 ESS PWB)