Service Parts Disassembly
Phaser 3610, WorkCentre 3615 Service Manual4-130
REP 7.9 No Paper Sensor
PL 7.2 Tray 1/Optional Tray 550-Sheet Feeder (2/4)
Removal
1. Remove the Tray from the 550-Sheet Feeder.
2. Remove (REP 7.1 550-Sheet Feeder).
3. Remove the No Paper Sensor, (Figure 1)
a. Release 3 clips that secure the sensor holder to the Feeder Assembly.
b. Disconnect P/J 4203,
c. Release three clips that secure the sensor to the sensor holder.
Figure 1
Replacement
1. Secure the left side of the holder to the feeder first.
2. Replace in reverse order.
s3610-122
P/J4203
b)
c)
a)
To Next Page
Loading...
