Xerox Phaser 3610

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-291
FIP 1.324
117-315 EEPROM Driver Error
Cause:
EEPROM Driver program error.
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
FIP 1. 327
117-321 Device Memory Error
Cause:
SD CARD Type Invalid.
Solution:
Turn the power Off and On to check that the error recurs, then proceed to the FIP.
Step Check and Action Yes No
1
Is the regular SD CARD used? Go to Step 2.
Use the regular
SD CARD
2
Is the Connector (P/J221) between the SD CARD
and the ESS PWB free of broken/bent pins, foreign
substances, burns, and etc., and is the unit installed
properly?
Go to Step 3.
Reinstall the SD
CARD
3
• Replace the SD CARD.
• Does an error occur?
Replace
(REP 5.1 ESS
PWB)
Troubleshooting
complete.