Xerox Phaser 3610

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-309
FIP 1. 374
133-279 FAX CODEC I/F Error
Cause:
FAX CODEC I/F error.
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Check the telephone line connection. Reconnect the telephone line connector.
3. Check the sending side fax. Receive the fax data from a good fax machine.
4. Update to the latest F/W.
5. If the error persists, ensure that the error is replicated after the printer is powered Off and
then On, and then replace the following parts in sequence.
•(REP 5.4 Fax PWB)
•(REP 5.1 ESS PWB)
FIP 1. 375
133-280 ERR_FAX_TIME
Cause:
FAX timer error.
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace the following parts in sequence.
•(REP 5.4 Fax PWB)
•(REP 5.1 ESS PWB)