Xerox Phaser 3610

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-230
FIP 1. 222
033-795 FAX Send Count Limit
Cause:
Reach the upper limit of Fax send accumulation pages.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Divide the documents in blocks.
2. Explain the maximum number of Fax scan pages to the operator.
FIP 1. 223
033-799 Fax Codec Error
Cause:
In MH,HR,MMR receive, exceed the maximum number of received lines for 1 page.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check the sending side fax machine or sending data.
2. Update to the latest F/W.
3. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
•(REP 5.4 Fax PWB)
•(REP 5.1 ESS PWB)