Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-165
FIP 1. 93
017-991 IIT Level Adjustment Fail
Cause:
At the start of IIT read job, fail to adjust IIT level.
Set to default value and continue processing.
Solution:
The machine will recover automatically.
If the error persists:
1. Turn the power Off and On to check that the error recurs.
2. Replace (REP 6.1 IIT Assembly)
FIP 1. 94
018-722 Google Cloud Print Network Error
Cause:
A network-related error has occurred.
Solution:
The machine will recover after the OK button is pressed or message is displayed for specified
time.
If the error persists:
1. Check the network connection status and the network settings.
2. Perform the following in sequence.
• " Network System Fault Check"
• " Network-related Details Check Flow"
3. Update to the latest F/W.
4. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace (REP 5.1 ESS PWB).
To Next Page
Loading...
