Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-141
FIP 1. 40
016-610 Panel Destination Mismatch
Cause:
Only for Production Line.
An attempt was made to apply JP setting to non-JP panel,
Solution:
No action is required.
FIP 1. 41
016-612 Invalid MAC Address
Cause:
MAC address is invalid.
Solution:
1. Rewrite Mac address.
2. Update to the latest F/W.
3. If the error persists, ensure that the error is replicated after the printer is powered Off and
then On, and then replace (REP 5.1 ESS PWB).
FIP 1. 42
016- 718 Memory Over flow
Cause:
The current printing job process cannot be continued because the memory capacity is exceeded.
Solution:
The machine will recover after the OK button is pressed or message is displayed for specified
time.
If the error persists:
1. Deleting the data by executing Clear Storage.
2. Execute "Clear Storage" under "Maintenance" in the Control Panel.
3. Ensure that the error is replicated after the printer is powered Off and then On, and then
upgrade the memory as required.
To Next Page
Loading...
