Xerox Phaser 3610

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-127
FIP 1. 03
005-301 DADF Cover Open
Cause:
Detect DADF Cover Open.
Solution:
•Close the ADF Cover.
• If the error persists, ensure that the error is replicated after the printer is powered Off and
then On, and then proceed to the FIP.
Step Check and Action Yes No
1
• Is the DADF Cover closed properly?
Go to Step 2.
Close the DADF
Cover properly
2
Check the connection between the DADF
ASSEMBLY and the ESS PWB.
• Is the P/J453 connected securely?
Go to Step 3.
Connect P/J453
securely
3
•Replace (REP 6.2 DADF).
• Does an error occur?
Replace
(REP 5.1 ESS
PWB).
Troubleshooting
complete.