Xerox Phaser 3610

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-286
FIP 1. 311
116-361 PCI Bus #0 Error Detected
Cause:
PCI Bus #0 Uncorrectable Error Detected.
(Connected with Remora EX(x4 port))
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace (REP 5.1 ESS PWB).
FIP 1. 312
116-362 PCI Bus #0 Host Bridge Controller Error
Cause:
PCI Bus #0 Host Bridge Controller Error. (Connected with Remora EX port)
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace (REP 5.1 ESS PWB).
FIP 1. 313
116-363 PCI Bus #1 Host Bridge Controller Error
Cause:
PCI Bus #1 Host Bridge Controller Error. (Connected with Remora EX port.)
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace (REP 5.1 ESS PWB).