Overview
Phaser 3610, WorkCentre 3615 Service Manual1-14
Printer Options
The Phaser 3610, WorkCentre 3615 printer options include:
• Additional RAM (512 MB - 3610 only)
• Productivity Kit (Device Memory 4G)
•Duplex Unit
• Optional 550-Sheet Feeder (Trays 2, 3, and 4)
•Printer Stand
• External Wireless Network Adaptor
Additional Memory
The Phaser 3610, WorkCentre 3615 features 1 slot that accepts a 512 MB of DDR2 DIMM. Memory
module must meet the following characteristics:
• PC2-5300 (667MHz memory bus speed)
• 200 Pin DDR2 DIMM (8 chip type)
• Unbuffered, Non-parity
The printer’s configuration page lists the amount of RAM installed in the printer.
Optional 550-Sheet Feeder (Trays 2, 3, and 4)
The Optional 550-Sheet Feeder increases the input capacity of the printer and can be attached to the
printer underneath Tray 1. Up to three Optional 550-Sheet Feeders can be installed on the printer.The
Optional 550-Sheet Feeder is customer installable.
External Wireless Network Adapter
The External Wireless Network Adapter enables the printer to connect to a wireless network.
To Next Page
Loading...
