Xerox Phaser 3610

Service Parts Disassembly
Phaser 3610, WorkCentre 3615 Service Manual 4-115
REP 6.2 DADF
PL 6.1 IIT Scanner / DADF
Removal
1. Remove (REP 6.1 IIT Assembly).
2. Remove the DADF. (Figure 2)
a. Flip the IIT Assembly on its side.
b. While applying a little pressure to separate the DADF from the Scanner, release the pins on
both DADF Hinges.
Figure 1
Replacement
1. Replace in reverse order.
s3610-106